Oil Line and Gallery Brushes

You can't have a clean engine with just a hot tank and an air hose with water. Our oil line and gallery brushes provide the mechanical agitation required to remove the old metal chips, grinding compounds, sludge and dirt from the passages that can't be seen - the oil passageways. Available in carbon steel or high-density 6-12 nylon.

Catalog No.	Dia.		Brush Part		OAL	Description - 6-12 Nylon
1	1/4	x	2	x	10	Small Stiff Brush for Feed Line Holes
1a						Same as #1 but with light fill and flexible stem
2	5/16	x	2 1/2	x	12	Stiff Brush for Crankshaft Holes and Valve Guides
2a						Same as #2, but with light fill and flexible stem
3	3/8	x	2 1/2	x	12	Same as #2
4	5/8	x	3	x	12	For Feed Lines and Main Bearings
5	5/8	x	3	x	34	Same as #4, but with extra length
6	3/4	x	3	x	12	For larger sizes of Lifter Holes
7	3/4	x	3	x	34	For Main Oil Galleries
8	3/4	x	3	x	40	For Main Oil Galleries
9	1 1/8	x	3	x	14	For Lifter Holes
38	3/8	x	3	x	34	For Oil Galleries
41	1/2	x	2 1/2	x	12	For Valve Guides
42	1/2	x	2 1/2	x	34	For Main Oil Galleries
46	1 1/4	x	4	x	12	For Tapered Pin Fitter
47	11/32	x	2 1/2	x	12	For Valve Guides
48	13/32	x	2 1/2	x	12	For Valve Guides
49	7/16	x	2 1/2	x	12	For Valve Guides
1 E Kit Contains: 3 ea. -#1, 1a, 2, 2a, / 6 ea. - #3 1 ea. - #4, 5, 6, 7, 8, 9, 38, 41, 42, 46, 10a(5") Total of 29 brushes (10% savings on reg. price) We use the finest quality high-density 6-12 Nylon in our Nylon Brushes.

Our oil line and gallery brushes provide the mechanical agitation required to remove metal chips, grinding compounds, sludge and dirt from the passages that can't be seen. Made with carbon steel for more aggressive cleaning on rough spots, corroded and pitted areas.

Catalog Number	Dia.		Brush Part		OAL	Description - 6-12 Nylon
11-C	1/4	x	2	x	10	Same as #1, but in Carbon Steel Wire
13-C	5/16	x	2 1/2	x	12	For Cam Bearing Feed Lines and Valve Guides
14-C	3/8	x	2 1/2	x	12	For Cam Bearing Feed Lines and Valve Guides
15	5/8	x	3	x	12	For Push Rod Holes
16	5/8	x	3	x	30	For Oil Galleries
18	1 1/8	x	3	x	14	For Lifter Holes
44-C	1/2	x	2 1/2	x	12	Same as #41, but in Carbon Steel Steel Wire
45	1/2	x	2 1/2	x	34	Same as #42, but in Carbon Steel Wire
47-C	11/32	x	2 1/2	x	12	For Valve Guides
48-C	13/32	x	2 1/2	x	12	For Valve Guides
49-C	7/16	x	2 1/2	x	12	For Valve Guides

Our 1 E Kit contains all the popular diameters for complete oil line and gallery cleaning. 29 brushes in all represent a tremendous savings compared to purchasing all the brushes separately.

OG KIT - A kit of 5 brushes made in 6-12 Nylon for cleaning the Oil Galleries. Each kit contains 1 of the following:
5	(5/8" x 3" x 34")
7	(3/4" x 3" x 34")
8	(3/4" x 3" x 40")
38	(3/8" x 3" x 34")
42	(1/2" x 2 3/4" x 34")