Brush Research Manufacturing (BRM), maker of Flex-Hone® tools and NamPower technology, will exhibit at WESTEC, the West Coast’s premiere manufacturing tradeshow.   From September 12 to 14, BRM will showcase surface finishing and deburring tools in Booth #2408 at the...

Miniature deburring brushes help keep small-diameter holes from becoming big-time finishing problems. These miniature metalworking tools remove small burrs that can cause part misalignments. They also perform internal cleaning and produce the proper edge radius on machined holes with small...

Wheel brushes can remove burrs and improve surface finish, but cutting tool manufacturers need the best tools to get the best results – especially with machined parts made of harder materials.     NamPower wheel brushes with diamond abrasive filaments...

Cross-hole deburring is an essential finishing operation for precision metal parts. In engine and transmission components, cross-drilled holes serve as conduits for fluids, lubricants, and greases. If burrs block these passageways, problems can result. Metal burrs in cross-drilled holes can also...

Parts manufacturers use Flex-Hone® tools to remove burrs and improve cylinder surface finish at the same time.   Made in the USA by Brush Research Manufacturing (BRM), Flex-Hone® tools improve part quality, reduce costs, and increase speed and efficiency.  ...

What do knives, boats, and vises have in common? They all need an outer diameter (OD) surface finish that’s smooth, attractive, and burr-free. Otherwise, potential customers may notice small surface imperfections that can lead to larger questions about product quality....

Plateau honing improves the surface finish of cylinder walls by reducing raised areas or peaks to a uniform height and removing cut, torn, and folded metal.   This surface finishing technique also imparts a series of grooves or valleys in...

Brush Research Manufacturing (BRM), maker of Flex-Hone® tools and NamPower technology, will exhibit at SOUTH-TEC and FABTECH this fall. If you plan to attend these industry-leading events, don’t miss your chance to meet BRM and solve your surface finishing challenges....

Brush Research Manufacturing (BRM), maker of the Flex-Hone® tool, recently introduced a new line of standard metalworking products for hard-to-finish materials. CBN Flex-Hone® tools use cubic boron nitride (CBN) abrasive for deburring, edge blending, and surface finishing cylinders made of...

Brush Research Manufacturing (BRM), maker of the Flex-Hone® tool, will exhibit at the 2017 SEMA Show, the world’s premiere trade event for automotive specialty products.   From October 31 to November 3, BRM will showcase automotive surface finishing and parts...

NamPower wheel brushes are great for removing sharp edges from metal parts such as cutting tools, turbine blades, gears, shafts, and extrusion cut-offs. In addition to removing burrs, NamPower wheels create a desired edge radius and impart a superior surface...

Deburring cross-drilled holes can be an expensive, difficult, and time-consuming operation. Without proper cross-hole deburring, however, part misalignments can occur. Personnel who handle these machined metal parts also face the risk of injury from ragged edges, raised areas, and sharp...